Why should a lift truck not be turned on a ramp?

Forklift stability is key, particularly when driving a lift on a ramp. If an operator turns their lift too quickly or sharply, he or she could inadvertently cause a tip-over.

How steep can a forklift ramp be?

There is no measurement to determine the gradient that a forklift can handle. Generally, a forklift can safely travel on a ramp with a gradient between 5% and 12.5%. But, it is always best to err on the side of caution. If a ramp looks too steep, forklift operators should avoid it.

Understanding Forklift Ramp Slope Requirements

forklift ramp safety

Forklift ramps are a common sight in many industrial and construction settings. They are used to move materials between different levels, and can be found both inside and outside of buildings. While forklift ramps can be a convenient way to transport goods, they can also be dangerous if they are not used properly. Here are some forklift ramp safety tips to prevent forklift accidents:

– Make sure the ramp is the correct size for your forklift. Ramps come in different sizes and slopes, so it is important to choose one that is appropriate for your equipment.

– Inspect the ramp before use. Check for cracks or other damage that could cause the ramp to collapse.

– Drive slowly and carefully when going up or down the ramp. Sudden stops or turns can cause the load to shift and topple over.

– Do not exceed the weight limit for the ramp. Overloading the ramp can lead to disaster.

By following these simple forklift ramp safety tips, you can help prevent accidents and injuries caused by forklift tipovers.

Do Your Employees Need Forklift Ramp Safety Training?

A forklift ramp can be dangerous, which is why forklift ramp safety should be included in your forklift operator training program. This is especially true if your employees frequently drive a forklift on inclines, slopes, and ramps.

With extensive training, your employees can learn best practices for how to drive a forklift on a ramp. They can also receive insights into OSHA forklift ramp requirements, comply with these requirements, and avoid OSHA penalties.

OSHA Forklift Ramp Requirements

OSHA defines any area where forklifts operate that exceed an angle of 10° as a ramp, incline, or slope. When driving a forklift on a ramp, OSHA CFR 1910.178 sets these standards:

Grades shall be ascended or descended slowly.
When driving on a grade that exceeds 10%, loaded trucks must drive with the load facing upward, regardless of whether a truck is traveling up or down a ramp.
A load must be tilted back across all grades, if applicable. The load should be raised only as much as necessary to clear the driving.

The formula to determine a ramp’s angle is simple: rise over run, multiplied by 100.

Divide the rise of the slope by the length of the ramp. Say you have a ramp that rises 12 inches over 10 feet, or 120 inches. Divide 12 by 120 to get 0.1, then multiply that by 100 to get 10. Your angle is 10 degrees, so is subject to OSHA ramp safety guidelines.

The bottom line: the ramp has an angle of 10°, so it is subject to OSHA ramp safety guidelines.

How to Operate a Forklift on an Incline or Ramp

Driving a forklift on an incline can be challenging, regardless of an operator’s experience. Fortunately, forklift operators who complete safety training can learn about the risks associated with driving a forklift on an incline. Perhaps best of all, these operators can receive insights into best practices for driving a forklift up and down ramps and grades.

To operate a forklift on an incline, a driver should review the lift’s operations manual. The maximum allowable slope varies based on the forklift, so a driver should find out the gradeability of their lift. Gradeability refers to the grade in which a forklift can climb and stop at full capacity. The highest gradeability forklifts may have a gradeability of 40%.

A forklift driver should also comply with OSHA mandates for driving forklift on incline. OSHA requires all lift operators to maintain slow speeds as they travel on an incline – even if the forklift isn’t carrying anything. Forklift safety training can make all the difference in promoting a safe work environment.

Forklift Ramp Safety: Smart Ramp Design

Following OSHA forklift ramp requirements can help reduce the risk of forklift accidents, injuries, and fatalities. Building safety features into loading dock ramps can also help mitigate these issues.

Various safety features are commonly incorporated into ramps, including:

1. High-Traction Surfaces

Loading docks get a lot of forklift traffic. They are also exposed to the elements, which can cause loading docks to become oily and grimy. Building ramps with open steel grating reduces moisture buildup and provides better traction for forklift wheels.

2. Low-Angle Slopes

Steep ramps increase the risk of forklift tip-overs or losing a load. Longer ramps create a shallow grade to reduce or eliminate these hazards.

3. Tall Ramp Curbs

Forklift drivers should always keep a safe distance from the edge of a ramp. When they don’t, steel curbs along the edge of the ramp can provide extra protection. The curbs should be tall and strong enough to stop a forklift when a driver misjudges the edge of a ramp.

4. Extra Anchorage

Accidents can occur if ramps or dock plates shift when forklifts are on a ramp. Doubling the number of anchors at the ground level can help prevent shifting.

Smart ramp design may help improve forklift operator safety, as well as prevent forklift accidents, injuries, and fatalities before they happen. It requires hard work and patience, but in the long run, may benefit your business and its employees.

Forklift Ramp Safety FAQs

For businesses that are uncertain about how to educate their workers about safe use of forklifts on ramps, help is available. Here are answers to common forklift ramp safety questions.

How should a forklift go up a ramp?

When traveling up a forklift ramp slope, always point straight forwards. Even the slightest movement to the left or right can result in a tip-over. If you’re carrying a load, always travel with the forks pointed uphill. If you’re not carrying cargo, be sure to point the forks downhill, even if you’re traveling up the ramp.

What is the maximum slope for a forklift ramp?

According to OSHA, “no ramp shall be inclined more than a slope of one vertical to three horizontal (20 degrees above the horizontal).” The specific maximum slope depends on the type of forklift being used. Check your manufacturer’s guide for guidance on your lift’s maximum slope abilities.

Can a forklift go down a ramp?

Yes, forklift ramps allow operators to travel both up and down. If you’re carrying a load, make sure the forks are pointed uphill as you reverse down the ramp slowly. When driving down a ramp with an empty forklift, travel in reverse and keep the lift’s forks pointed downward.

Can you turn a forklift on a slope?

Avoid turning to the left or right when traveling on a forklift ramp slope. Even the slightest of angles can lead to tip-overs. When operating a forklift on a ramp or incline, keep wheels pointed straight to avoid accidents and injuries.

How long does it take to stop a forklift on a ramp?

When traveling on flat ground, a forklift driving 7 mph will need approximately 16 ft. to come to a complete stop. Comparatively, on a forklift ramp, it takes additional time for a forklift operator to stop their lift. As such, forklift operators should give themselves extra stopping time when they drive on an incline or decline. Otherwise, if operators do not account for braking distance, they risk driving too fast or traveling too close to bystanders or objects. This can lead to forklift accidents, along with serious injuries or fatalities.

How long does it take to stop a forklift on a ramp?

Forklift ramp safety is a top consideration for companies that employ forklift operators. By teaching their forklift operators how to safely use a lift on an incline or decline, these businesses can comply with OSHA standards. Have questions about our forklift training courses? We’re happy to provide additional insight into our offerings. To learn more, please contact us online or call us today at 1-888-699-4800.